Preview page | The Lock Reference

The Eurospec MPX6 is a standard spacing one star cylinder
There are anti bump chambers in positions 4 and 5
Due to this EPG success can vary depending on key bitting
The Lishi 6B is the perfect tool to pick these
The spacings line up perfectly and makes it easy to navigate
When you go into a false set remember to manually counter rotate to pick the spool pins
Remember that the pins in positions 4 and 5 although not necessarily zero cuts they will pick at an index of 3 up to 1 on your lishi
These can be bumped nicely

ERA Profit is a gold 7 gauge mortice lock with square notch levers
Easily identifiable by its thick curtain, horizontal hardplate and nipples either side of keyway
It has 7 lever heights with 1,2,3,4 being the high lifts
When picking we can seperate the highs and lows by running a pick wire under the front of the levers
If the wire sits at just under 9 o clock it is a low lift
If the wire site at just after 10 o clock it is a high lift
We can pick the high lifts first by setting them at approx 11 o clock
Then we can nudge the lows to get the open
GJ ERA Viscount pin and cam makes light work of these
Also very susceptible to overlifting
A common fault on these is the curtain wearing out